Silver-based SERS substrates fabricated using a 3D printed microfluidic device

• Phommachith Sonexai,
• Minh Van Nguyen,
• Bui The Huy and
• Yong-Ill Lee

Beilstein J. Nanotechnol. 2023, 14, 793–803, doi:10.3762/bjnano.14.65

• assembled into a monolayer on a liquid/air interface and deposited onto a porous silicon array prepared through a metal-assisted chemical etching approach. By using the developed microfluidic device, enhancement factors of the Raman signal for rhodamine B (at 10−9 M) and melamine (at 10−7 M) of 8.59 × 106

• ], porous aluminum oxide [38], and semiconductors [39] have been reported. Dielectric and semiconductor substrates, such as ZnO nanowires, silicon nanowires, and porous silicon (PS), are particularly popular because of their larger contribution to the amplification of the Raman signal and longer shelf life

• developed system. The substrate was prepared from Ag NPs by decorating the surface of porous silicon with Ag NPs using self-assembled monolayers (SAMs). The SAM method offers precise control, versatility, simplicity, stability, and compatibility, making it a valuable technique for surface modification in

An overview of microneedle applications, materials, and fabrication methods

• Zahra Faraji Rad,
• Philip D. Prewett and
• Graham J. Davies

Beilstein J. Nanotechnol. 2021, 12, 1034–1046, doi:10.3762/bjnano.12.77

• example using porous silicon, is one possible solution [39][40][41]. However, a hydrogel reservoir which could be much larger than the microneedle array seems a better option, since it can swell to achieve greater load which can be released under finger pressure in combination with microfluidic

• such as abscess formation or granulomas. The enzyme systems of the human body do not break down bulk silicon, so silicon fragments may remain in tissue for life, causing scarring and fibrosis. However, porous silicon is different, with its bioactive ability to bond to living tissue and for its

• biodegradable and biocompatible nature. It was first shown in 1995 that, by introducing porosity into silicon, the material behaviour can change to provide a bioactive and even resorbable material [92]. Unlike bulk silicon, in alkalescent media (pH ≈ 7.5), porous silicon is broken down by hydrolysis in living

The impact of molecular tumor profiling on the design strategies for targeting myeloid leukemia and EGFR/CD44-positive solid tumors

• Nikola Geskovski,
• Nadica Matevska-Geshkovska,
• Simona Dimchevska Sazdovska,
• Marija Glavas Dodov,
• Kristina Mladenovska and
• Katerina Goracinova

Beilstein J. Nanotechnol. 2021, 12, 375–401, doi:10.3762/bjnano.12.31

• developed E-selectin-targeted porous silicon particles with capabilities for selective uptake to the BM [35]. The authors formulated a multistage carrier composed of porous silica microparticles that encapsulate nanoscale paclitaxel-loaded liposomes. The porous silica particles were decorated with E

• without ligands, in a healthy murine model. Even though the authors reported an organ distribution of nearly 20% per gram in the BM, most of the porous silicon particles were entrapped in the spleen, liver, and lungs, because of their size and surface characteristics. In this case, the physicochemical

Wafer-level integration of self-aligned high aspect ratio silicon 3D structures using the MACE method with Au, Pd, Pt, Cu, and Ir

• Mathias Franz,
• Romy Junghans,
• Paul Schmitt,
• Adriana Szeghalmi and
• Stefan E. Schulz

Beilstein J. Nanotechnol. 2020, 11, 1439–1449, doi:10.3762/bjnano.11.128

• platform and can be adapted to detect biomolecules [9]. Silicon nanowires are used as template for cancer sensors. The nanowires are implemented as gate in integrated sensing FETs [10][11]. A wide range of chemical sensors and biosensors benefit from porous silicon structures [12]. All these presented

Commercial polycarbonate track-etched membranes as substrates for low-cost optical sensors

• Paula Martínez-Pérez and
• Jaime García-Rupérez

Beilstein J. Nanotechnol. 2019, 10, 677–683, doi:10.3762/bjnano.10.67

• optical field to interact with much more matter, increasing the sensitivity as well [3][5]. Porous silicon is the most explored material for the fabrication of porous optical sensors. It can be easily fabricated and there are several well-known chemical strategies to modify its surface [6]. However, in

• the development of optical sensors: polycarbonate track-etched (PCTE) membranes. PCTE membranes, which are typically used for size-based filtration [9][10], are reminiscent of the porous structure of a monolayer of porous silicon, a material that has an optical response of a Fabry–Pérot (FP

• ) interferometer. This porous silicon structure has long been used for sensing [6] and we hypothesized that PCTE membranes might have the same optical response and be useful for sensing purposes, too. To study the utility of PCTE membranes for sensing purposes, we characterized their optical response in the near

Preparation and morphology-dependent wettability of porous alumina membranes

• Dmitry L. Shimanovich,
• Alla I. Vorobjova,
• Daria I. Tishkevich,
• Alex V. Trukhanov,
• Maxim V. Zdorovets and
• Artem L. Kozlovskiy

Beilstein J. Nanotechnol. 2018, 9, 1423–1436, doi:10.3762/bjnano.9.135

• [10][11], and the development of new nanoporous composite materials based on PAA [12][13]. Both of these are commercially available. Porous silicon formed by electrochemical anodizing [14], zeolites [15], porous mica [16], nanoporous polymer glasses [17] and other materials [18] have also been studied

Properties of Ni and Ni–Fe nanowires electrochemically deposited into a porous alumina template

• Alla I. Vorobjova,
• Dmitry L. Shimanovich,
• Kazimir I. Yanushkevich,
• Sergej L. Prischepa and
• Elena A. Outkina

Beilstein J. Nanotechnol. 2016, 7, 1709–1717, doi:10.3762/bjnano.7.163

• the metal with the matrix material of the pores and the formation of a non-ferromagnetic alloy. Similar effect was observed for Ni deposited into porous silicon templates [43][46]. The Curie temperature, TC, for the fabricated composites was defined according to the Curie–Weiss law, notably, the

Effects of swift heavy ion irradiation on structural, optical and photocatalytic properties of ZnO–CuO nanocomposites prepared by carbothermal evaporation method

• Sini Kuriakose,
• D. K. Avasthi and
• Satyabrata Mohapatra

Beilstein J. Nanotechnol. 2015, 6, 928–937, doi:10.3762/bjnano.6.96

• oxide coated over porous silicon substrates. The changes in the structural and optical properties of ZnO thin films due to 100 MeV Au8+ irradiation were investigated by Agarwal et al. [37]. Even though there have been several studies on the ion-induced evolution of the structural and optical properties

Localized surface plasmon resonances in nanostructures to enhance nonlinear vibrational spectroscopies: towards an astonishing molecular sensitivity

• Dan Lis and
• Francesca Cecchet

Beilstein J. Nanotechnol. 2014, 5, 2275–2292, doi:10.3762/bjnano.5.237

• through morphology is an interesting alternative that, under some conditions, can lead to enhancement of the electromagnetic field at the interface. Indeed, the authors successfully amplified the SFG signal of the H-terminated porous silicon surfaces (with increasing porosity). Although they did not

• better amplification could be obtained if conceiving a porous silicon photonic structure with two levels of defects, so that it could be in resonance with the visible and the SFG beams simultaneously. 4.3 Surface enhancement from LSPR Besides few examples of surface-enhanced SFG from SPP waves coupled

In situ metalation of free base phthalocyanine covalently bonded to silicon surfaces

• Fabio Lupo,
• Cristina Tudisco,
• Federico Bertani,
• Enrico Dalcanale and
• Guglielmo G. Condorelli

Beilstein J. Nanotechnol. 2014, 5, 2222–2229, doi:10.3762/bjnano.5.231

• 17/A, 43124 Parma, Italy 10.3762/bjnano.5.231 Abstract Free 4-undecenoxyphthalocyanine molecules were covalently bonded to Si(100) and porous silicon through thermic hydrosilylation of the terminal double bonds of the undecenyl chains. The success of the anchoring strategy on both surfaces was

• metalated in situ with Co by using wet chemistry. The efficiency of the metalation process was evaluated by XPS measurements and, in particular, on porous silicon, the complexation of cobalt was confirmed by the disappearance in the FTIR spectra of the band at 3290 cm−1 due to –NH stretches. Finally, XPS

• synthesized to allow for a silicon grafting by functionalization with four undecenyl chains each having a terminal double bond. Phthalocyanine covalent anchoring was performed through thermic hydrosilylation on flat Si(100) and on porous silicon (Si-1-Pc and PSi-1-Pc, respectively). The success of the

Review of nanostructured devices for thermoelectric applications

• Giovanni Pennelli

Beilstein J. Nanotechnol. 2014, 5, 1268–1284, doi:10.3762/bjnano.5.141

Preparation of electrochemically active silicon nanotubes in highly ordered arrays

• Tobias Grünzel,
• Young Joo Lee,
• Karsten Kuepper and
• Julien Bachmann

Beilstein J. Nanotechnol. 2013, 4, 655–664, doi:10.3762/bjnano.4.73

• based on porous silicon [7][9]. However, no study is available to date in which the geometric parameters of this system were varied systematically in order to pinpoint the critical length scales associated with mass transport, charge transport, and mechanical relaxation. We propose an experimental

• platform specifically designed to provide the experimental capability of tuning individually every single geometric parameter in such a porous silicon structure created in an inert matrix (Figure 1): the pore length L, the pore diameter D, the silicon layer thickness d, and the interpore distance P. The

Nanostructure-directed chemical sensing: The IHSAB principle and the dynamics of acid/base-interface interaction

• James L. Gole and
• William Laminack

Beilstein J. Nanotechnol. 2013, 4, 20–31, doi:10.3762/bjnano.4.3

• -transduction process that forms the basis for reversible chemical sensing in the absence of chemical-bond formation. Gaseous analyte interactions on a metal-oxide-decorated n-type porous silicon interface show a dynamic electron transduction to and from the interface depending upon the relative strength of the

• interactions; IHSAB theory; nitrated oxides; porous silicon; Introduction The combination of tailored active interfaces, the ability to confine processes at the nanoscale, and the ability to manipulate nanostructured materials and their interaction at these select interfaces, offers the opportunity to develop

• nanoporous coating (green in Figure 1). A hybrid etch procedure is used to create this desired interfacial support structure. It is possible to replace the porous silicon (PS) structure that has been etched into a silicon wafer with any alternate extrinsic III–V (GaP or InP) or II–VI semiconductor (CdTe or